Introduction of installation method of small weather station in greenhouse
The small weather station in the greenhouse is mainly used for the monitoring of meteorological elements in the field. Through the monitoring of the meteorological elements in the field, it provides data support that can be referenced by the farmers. Therefore, the accuracy of the monitoring data of the small weather station in the field is very important. The accuracy of the monitoring data of the weather station, the installation also needs to pay attention to the following points!
Although the installation of the small weather station in the greenhouse is simple, it cannot be installed by just one person. The installation of the automatic weather station requires a special person to be present or to guide the installation, because there are some details in the installation of the automatic weather station itself. For the unfamiliar, such as the installation of wind direction monitoring, there is a point. This point needs to face the south, otherwise it will cause errors in the monitoring results. Therefore, people who have no installation experience in the automatic weather station cannot complete the installation independently.
Installation Environment Requirements
For the installation of small weather stations in greenhouses, it is necessary to keep the surrounding area open, and there cannot be too high buildings to block them. Will too tall buildings affect the monitoring results? For example, wind direction and wind speed are easily affected. Avoid high magnetic fields and Strong radiation areas, because the automatic weather station itself relies on sensors to monitor meteorological elements, and the sensors themselves are relatively precise. In order to avoid the accuracy of the monitoring results, try to avoid high magnetic fields and strong radiation areas during installation.
The greenhouse small weather station itself is very sophisticated equipment, so it is necessary to treat the equipment gently during installation, handle it with care, and not treat the equipment roughly, and do not scribble on the equipment during installation to ensure the cleanliness of the equipment tidy.
The above is an introduction to the installation method of the small field weather station. In addition, it is reminded that an equipment inspection needs to be done before the installation of the small field weather station to check whether the packaging is in good condition and the equipment is complete, so as to avoid finding the items to be supplemented during the half installation. If you have anything else that you don't understand about the installation of the small weather station in the field.